Curiel Mechanics, we are a machining company in Barcelona in which we have been carrying out different types of machining for many years, among which we want to highlight machining by chip removal, since it is one of the oldest processes that we already used in our beginnings.
To begin, from our company of machining in Barcelona We believe that it is very important that you know the definition of chip removal machining. This type of machining is a process in which small chips are separated from an initial part, in order to create a specific part, normally using different types of blades.
To carry out this process, we go through three different processes, firstly roughing, in which all the unnecessary material is removed very quickly and without much precision, secondly we go to finishing, in which the material is removed but in a much more precise way than in the previous process, in order to give it a fairly definitive result, and finally, the superfinishing or grinding is carried out, in order to finish giving it a precise shape and a perfect finish.
Most common materials and movements of chip removal machining
As you can see, it is a very well thought out process so that the piece obtained is perfect and does not have any type of failure, but we cannot use pieces made of any material, but normally metals, although different types of plastics can also be used, and some ceramic compounds, as long as abrasive machining is used.
Regardless of the material used, there are only three movements that can be performed on our machining company in Barcelona, when working with these pieces, although we must say that with these three movements there is more than enough to form any piece, since they can be used both individually and in combination with each other.
The main movement is the cutting movement, since it is responsible for producing the chip, we also have the advance movement, which is the one that moves the tool used to cut from one side to the other, and finally, we have the feeding movement that we can define as the depth of pass parameter, that is, the thickness that cuts a material.
At our machining company in Barcelona, we consider that chip removal machining is very important and covers many different processes, for this reason we wanted to divide the information into two parts, so you cannot miss the next article that we will publish on our blog, in which you will learn all types of tools that can be used.
Comments are closed.
