In today's article we are going to talk to you about the importance of paying attention to design in machining production, to optimize all processes.
It is possible to optimize the design of the CNC machining through various techniques, such as simplicity, since one of the big mistakes that are made is that the design of the pieces is too complicated and, normally, you always have to take into account the “less is more”.
Take note for the design of your CNC machining and achieve maximum profitability during the machining process
In the design of CNC machining It is important to consider the possibility of dividing the multi-faceted super pieces into simpler components that allow them to be screwed, glued and screwed together.
If it is not necessary for functionality reasons, it is recommended to avoid swept surfaces, because these usually require more complex machining with a ball-shank milling cutter. It is advisable to create pieces with elements that can be cut on one side, if possible, as it will make the entire process easier.
Evaluate part tolerances if necessary, because mistakes are often made by making parts more precise than necessary. Tolerances can be strict and the specialized operator of CNC machining You may be forced to modify the part program, to use a special cutter or perform a secondary operation, depending on the case. It is better to take into account the block tolerances indicated in the plans, to know what is most consistent for each case.
Forget the text; In the design of the CNC machining Sometimes text is applied to mark pieces with letters, numbers, descriptions or company logos, but the problem is that it is expensive to produce because each character must be traced with a knife and consumes valuable time. But there are options like laser marking or a rubber ink stamp. It is always better to evaluate the most profitable option for each case.
Beware of narrow pockets and high walls, and cutting tools are made of rigid materials, but they deflect slightly when subjected to machining forces, a phenomenon that becomes more problematic as the tool protrudes from the tool holder.
Also be careful with thin walls, because they can suffer deflection problems and the characteristics of the piece in question and the material must be taken into account.
Drilling too much has risks. The drill is a common tool in CNC machining and the deeper the holes and the deeper they are made in relation to the diameter, the more expensive the piece is.
Comments are closed.
